garage floor treatment, garage floor mat


   I have to admit it, I was a little intimidated by the thought of doing a garage floor treatment myself. I researched the project online and I thought I could handle it. The product that I was using was top of the line. It was a 5 step process that would make my garage floor almost impervious to anything. Step one I had to shop vac the floor really good. I wiped the floor down with water and then began step two. Step 2 is what made me kind of nervous. It involved using muriatic acid to acid-etch the floor, however after I read the instructions and watched the short video I was somewhat confident. The whole process was very simple and only took about fifteen minutes to apply, two hours to cure and then clean up. After I acid-etched the floor I cleaned it thoroughly and then applied the primer sealer (process three). Process four involved cleaning the primered floor with denatured alcohol. Process five is the fun part. I mix this two part epoxy together along with a little denatured alcohol and I squeegee this viscous material over the floor. I then use a 30 inch roller, high nap paint brush to evenly roll on the material. I used four coats of the epoxy, and let me tell you it looks great. If your garage is looking a little rough, look into treating it, its fun and looks great.


  There are alot of options to treating your garage floor. A garage containment floor mat is a very good option for your garage floor protection. A garage floor mat lasts forever and looks good. So whether you are using a garage floor treatment or a garage floor mat, have fun with your project.